Leading 10 usual forklift accidents ， forklift procedure need to pay attention to these issues ！.

Don't ignore the forklift at the workplace. If the procedure is bad, there will be major accidents in minutes, and there are several accidents entailing forklifts.

Case 1: The forklift cargo obstructed the vehicle driver's view, and the individual ahead could not be found, leading to a rolling accident.
Case 2: In order to keep the equilibrium of the forklift when raising heavy goods, the workers used their body weight as the weight, which virtually created casualties.
Instance 3: The width of the forklift cargo surpasses the permitted size of the path and holds on the roadside shelf, which nearly triggers an accident.
Instance 4: Forklift is speeding and surrender during a turn.
Instance 5: The forklift motorist did not discover the pedestrian, and the pedestrian did not see the forklift.
Situation 6: The forklift raises the workers illegally, the forklift vehicle driver does not put on the seat belt, the forklift lifter drops and the chauffeur is squashed when the forklift rolls over.
Situation 7: The forklift driver did not put on a seat belt and dropped from the car when it surrendered and was crushed.
Forklift operation must focus on these issues ：.

Begin.
1. Before beginning, observe the environments, and after verifying that there are no challenges that hinder the safety and security of driving, honk the horn first and afterwards start.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) gauge have to be safe before beginning.
3. When the forklift begins with a load, the motorist needs to initially confirm that the load is steady and reliable.
4. The begin needs to be slow-moving and constant.

Driving.
1. When driving, the height between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the pole should be tilted in reverse. .
2. Do not lift the fork too expensive when driving. When going into and leaving the work website or while driving, take care that there will be no obstacles in the sky. When the lots is taking a trip, the fork needs to not be increased too expensive, which will impact the stability of the forklift. .
3. After discharging, the fork ought to be lowered to the regular driving placement before driving. .
4. When turning, if there are pedestrians or cars nearby, the driving signal should be issued initially. High-speed doglegs are forbidden. High-speed sharp turns will certainly create the lorry to shed side stability and tip over. .
5. When the forklift is downhill, it is purely prohibited to turn off the fire and slide, and it is prohibited to brake unexpectedly while driving with tons unless there are special situations.
6. When the forklift is running, it must comply with the web traffic rules in the manufacturing facility and need to keep a particular safety range from the car in front. .
7. When the forklift is running, the lots should remain in the lowest placement that does not impede the driving, and the gantry ought to be properly tilted back. The lots shall not be raised except when stacking or packing. .
8. The elevation of the load need to not obstruct the motorist's view. In special scenarios, when the item influences the forward vision, drive at a low speed when turning around.
9. It is forbidden to switch on the ramp, neither to drive throughout the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility area is 5 km/h, and it must drive securely at a low speed when getting in the production workshop area. .
11. When the forklift is lifted, lifted Stand-on Electric Pallet Stacker or driven, it is restricted for employees to stand on the fork to hold items and play a stabilizing duty. .
12. If troubles are located, they will be fixed and reported in a prompt manner, and they will never operate with health problems or conceal them.

packing and unloading.
1. When fork-loading products, the distance between both forks must be changed as needed to make the lots of both forks well balanced and not manipulated, and one side of the thing need to protest the shelf. .
2. It is prohibited to collaborate with a single fork or use a fork top or pull. In special circumstances, safety warning signs have to be established to remind surrounding pedestrians. .
3. In the process of loading and unloading things, the forklift needs to be braked with the brake. .
4. The speed of the lorry must be sluggish and steady. Take care not to roll the wheels on the dunnage, so as not to extend the rolled objects and harm people. .
5. When utilizing a fork to fork the goods, the fork must be as deep as possible under the tons, and it ought to be kept in mind that the fork suggestion need to not touch other items or objects. The tons needs to be stabilized with marginal back tilt of the gantry to make sure that the load does not move in reverse. The mast can be tilted onward slightly when the tons is decreased to permit easy positioning of the lots and extraction of the forks. .
6. It is prohibited to fork products at broadband and collide with hard items with the fork head. .
7. When the forklift is functioning, it is restricted for people to stand around the fork, so as to stay clear of the collapse of the goods and injure people. .
8. Overwhelming is banned, and it is prohibited to utilize forks to raise employees to engage in high-altitude operations to prevent high-altitude falling mishaps. .
9. It is not permitted to make use of the brake inertia to slide, put, round or roll objects. .
10. It is not allowed to utilize forks to choose, transform pallet discharge.

Leaving .
1. It is restricted to leave the forklift when the things on the fork impend. Prior to leaving the forklift, you have to dump the goods or reduced the fork framework.
2. Pull the emergency brake manage to dead or dispirit the hand brake button.
3. The engine is switched off and the power is removed. (Except for unique scenarios, such as the driver does not leave the car's line of vision and does not exceed 1 minute).
4. Remove the key. .

Forklift Operation Precautions.
1. Prior to and after the forklift procedure, the look must be inspected, and fuel, lubricating oil and cooling water should be included.
2. Examine the security performance of starting, running and stopping.
3. Examine whether the lights and horn signals are total and efficient.
4. During the operation of the forklift, examine whether the stress and temperature are normal.
5. After the forklift is running, the exterior leak ought to also be checked and the seals need to be changed in time.

Forklift Safety Operation Specifications.
1. You should check before leaving the vehicle;.
2. When you encounter a person in front of you during driving, you must send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming ought to not be too sharp to stop the tendency of "free switching";.
6. Running up and down the incline must be slow and consistent, and no turning on the incline is enabled.
7. Do not drive throughout the gradient. When the slope is higher than 10%, the lorry must be driven backwards when declining;.
8. When the forklift personnel bring the goods and progress, if they run into large or hefty goods and most likely to the driver's line of vision, they should take the reversing workout
.
The "Eight Prohibitions" ought to be adhered to in the operation.
1. Single fork procedure is not allowed.
2. It is not enabled to raise the goods for long distance driving.
3. It is not enabled to grab the goods by turning over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and other harmful chemicals with forks.
5. It is not permitted to use inertia force to grab the goods.
6. It is not permitted to use braking pressure to expatriation round or easy-to-roll items.
7. It is not enabled to bring individuals to work on the pallet or fork, and it is purely prohibited to stand under the fork after the fork is elevated.
8. Do not drive laterally on slopes
.
Car park is not allowed under the following conditions.
1. Curves, slim roadways, train crossings;.
2. Areas with Electric Forklift Truck for Warehouse a longitudinal slope greater than 5%.
3. When there is an challenge on one side of the road, the contrary side of the area with the very same size as the barrier should be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844